Clearwater C140 / BH4000 Salt Cell + Lead Repair Kit

Description

• 7  SOLID Plates each 111mm
• Solid Plate Cathode & Solid Plate Anode
• 15amps
• 5 years warranty
• Replaces old cell with no adjustments

ADVANTAGES OF SOLID PLATE 

• Solid plate is easier to clean. The calcium just falls off.
• Takes about 1/10^th of the time compared to mesh cathode.
• In a cathode they last longer (as they have up to 3 times more material than mesh)
• They stay clean longer.
• There is no problem with using them in place of a mesh cell

LEAD REPAIR KIT

• This cable kit fits ALL Models of the B & C-Series Cells
• B140 C140 B170 C170 B200 C200 B250 C250 B330 C330
• No soldering required.
• It is very important the cell leads are in good condition. Burnt or old leads can damage your cell and could void warranty

INSTRUCTIONS

1. Ensure crimping is done with a good crimping tool (do not use pliers)
2. Place smaller heat shrink over metal crimps
3. Place large heat shrink over all the terminals
4. Ensure heat is applied evenly and no terminals are exposed after heating
5. If brass plugs are loose fitting then close the female plug slightly
6. You must have a tight fit

5 YEAR WARRANTY

The cell will be replaced in the first 2 years if any manufacture defects are visible. There will then be a further 3 year pro-rata warranty based on the recommended retail price at that time.